SL70 2nm Solar Marine Light (high performance)

The SL70 is exceptional in it’s unique ability to be able
to ‘track the sun’ and operate reliably in low sunlight conditions.
The SL70 has been proven to operate as a 2-mile compact buoy lantern
in various low-sunlight environments such as Britain, Canada, and
Europe.
Made from tough, durable polycarbonate and using the latest high intensity LED’s, the SL70 lantern boasts dual high-performance solar modules incorporated into Sealite’s world-first Solar Collection Lens. These solar modules are angled to obtain maximum sunlight capture, allowing the unit to operate reliably in a range of low sunlight environments.
The SL70 can be installed in minutes, and requires no operator intervention. The flash-characters are easily adjusted on-site by the user, and the lantern has a permanent ON/OFF switch for easy storage.
The sealed battery compartment allows the battery to be replaced after years of service – don’t throw the light away at the end of the battery service life.
Sealite’s SL70 solar marine light has been awarded the prestigious Australian DesignMark® at the Australian Design Awards; a testament of Sealite’s commitment to the ongoing development of state-of-the-art products.
Optional RF Communication Synchronization (SL70-CS)
The SL70 is now available with optional short-range RF communication
synchronization. Two (2) or more lights can be synchronized to flash
in unison via an internal RF module - ideal for rivers, marina
entrances, channel marking and aquaculture.
Optional 12 LED Light Configuration (SL70-12)
In high sunlight regions the SL70 may be fitted with 12 LED’s and
appropriate intensity settings to provide a range of >3 nautical
miles and peak intensity >25cd.
Features of the Sealite SL70
- Dual internal high-performance solar modules
- 6 ultra-high intensity LEDs
- NiMH battery for long service life & wide temperature range
- 4 user-adjustable intensity settings
- ON/OFF storage switch
Advantages of the Sealite SL70
- Reliable year-round operation in low sunlight conditions
- 256 IALA flash patterns, user-adjustable without the need for external devices
- User-replaceable battery in sealed battery compartment
- Award-winning lens design
- IP68 waterproof
- Full 3 year warranty
Options Available for the Sealite SL70
-
RF synchronization
-
Radio Control
Additional Information about the Sealite SL70
The SL70 is also available with hard wire synchronization, 12 LEDs for greater light intensity (SL70-12), 16Ah battery (SL70-16Ah) and 50mm adaptor plate.
Specifications
Light Characteristics |
|
| Light Source | 6 ultra-high intensity LEDs |
| Range | >2nm |
| Flash Color | Red White Yellow Blue Green |
| Intensity | Red 10.0, Green 10.1, White 12.1, Yellow 8.9 cd |
| Horizontal Output | 360 degrees |
| Vertical Divergence | 9 degrees |
| Flash Settings | Up to 256 IALA recommended (user adjustable) |
| Lamp Life | >100,000 hours |
Electrical Characteristics |
|
| Current Draw | Minimal |
| Circuit Protection | Integrated |
| Operating Voltage | 3.6v |
| Autonomy | 30 days (14 hour darkness, 12.5% duty cycle) |
Solar |
|
| Solar Module Type | Multicrystalline |
| Output | 2.5watt (2x 1.25watt) |
Power Supply |
|
| Battery Type | High grade NiMH - Environment friendly |
| Battery Capacity | 8Ah |
| Battery Voltage | 3.6v |
Physical Characteristics |
|
| Body Material | LEXAN® Polycarbonate - UV stabilized |
| Lens Material | LEXAN® Polycarbonate - UV stabilized |
| Mounting | 200mm OD base pattern |
| Height (cm/inches) | 240 / 9.45 |
| Width (cm/inches) | 231 / 9.09 |
| Mass (Kg/lbs) | 1.1 / 2.3 |
Certifications |
|
| CE | EN61000-6-3:1997, EN61000-6-1:1997 |
| Quality Assurance | ISO9001:2000 |
| Waterproof | IP68 |
Intellectual Property |
|
| Patents | US Pat. No. 6,667,582. AU Pat. No. 778,918 |
| Trademarks | SEALITE® is a registered trademark of Sealite Pty Ltd |
More images of the Sealite SL70
Please contact us to discuss your specific needs.
